Never use roughĪfter cleaning the control panel, touch CLEAR.
Kenmore microwave free#
SPECIAL CARE For best performance and safety, the inner door panel and the oven front frame should be free of food or grease buildup. NOTE: Should the Teflon coating be scratched off, the oven function will not be affected. To clean, use only a foam sponge or wash cloth with a mild kitchen cleaner.
Hard objects and abrasive cleaners may scratch the coating. Do not apply abrasive powders, metal or nylon wash pads, nor any metal objects such as knives and forks to the fan cover. The fan cover is coated with Teflon* for easy cleaning. Eric Kleinert Use the Latest Tools and Techniques to Troubleshoot and Repair Major Appliances, Microwaves, and Room Air Conditioners Now covering. To replace, set the cover in the rails at the rear of the oven and secure it using the two screws at front.ĬAUTION: Wipe the fan cover after each use to keep the food soils from falling onto the cooking Stirrer blade, as this cause uneven cooking or microwave power loss.
The fan cover can be removed by taking out the two screws used to hold it in place and pulling off the cover carefully. Buy Now: kenmore built in depot range hoods, refurbished norcold rv refrigerators, most expensive home espresso machine, mitre 10 range hood. The fan cover (inside oven top) can be gently wiped in place or removed for washing with detergent in a sink. Do not use rough cleaning powders, steel wood, or rough cleaning pads. Wipe up spillovers with paper towel or cloth before removal of tray. The Ceramic Tray and Metal Rack can be removed for cleaning at the sink. Wipe food or liquid from sensor with damp cloth. Wire, plug and sensor sections may be hot. REMOVABLE PARTS After each use of the Temperature Probe, it must be removed from the socket. For cleaning of the Dehydration Rack and Net, it is recommended that a mild detergent, soft cloth or nylon brush for stubborn stains such as beef jerky marinade can be used. After dehydrating foods such as onions and marinated beef jerky, it is normal to have some odor retention in the oven for a few days. This will clear any entries that might have been entered accidentally while cleaning the panel. After cleaning the control panel, touch CLEAR. With a mild detergent, rinse, and wipe dry. For best performance and safety, the inner door panel should be free of food or grease buildup Wipe both often It is recommended that the oven be cleaned each time after use before the oil spatters harden and become difficult to remove. After convection cooking in particular, the interior of the oven tends to be stained with spattered oil. The oven cavity is made of stainless steel and should be cleaned with a detergent specially formulated for stainless steel.
0 kommentar(er)
